Alpha A75 3S HD Whoop w/Polar Nano Vista Digital HD System - BNF

Alpha A75 3S HD Whoop w/Polar Nano Vista Digital HD System - BNF

Product Code: C009424
Stock In Stock

Available Options

Product Description

Let's welcome the iFlight Alpha series, a new way to fly FPV. Ever wanted to try Digital FPV on the smallest possible whoop size quad? We sticked the caddx Vista and the new Polar Nano cam to one of our new 1.6inch whoop frames, did some tuning and tried to find the optimal ratio between weight and power. This is what we came up with to combine flight time efficiency with sufficient power. 

More video show from Magic KimGuNi :


  • 66.9 grams (without battery) 
  • Butter smooth XING 1103 8000KV,more torque and efficiency 
  • Ducts to protect the sensitive environment or yourself
  • Pre-tuned with smooth cinematic settings
  • iFlight Albatross 5.8G light antenna upgrade (included)
  • iFlight Albatross 900mhz light micro antenna upgrade (included with every Crossfire Nano RX)

Alpha A75 HD BNF Specs:

  • Raze Whoop AIO F4
  • XING 1103 8000KV FPV Micro Motor
  • Wheelbase: 78mm
  • Body size: 102.9*102.9mm
  • Ducted propeller size: HQ 40mm 1.6 inch
  • FC pattern: 25.5*25.5mm
  • FPV cam spacing: 14mm
  • Weight: 66.9g (without battery)
  • Battery: 3S 450mAh (not included)


- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

Alpha A75 HD Quad BNF Included Components and Parts

  • Prebuilt and tested Quadcopter
  • 1x Alpha 78mm Frame
  • 1x Polar Nano Vista Digital HD System Kit
  • 1x Albatross LHCP ipex 5.8g light antenna
  • 1set x Gemfan 40mm 1.6inch 1635 3-blades (Set of 2 - Color May Vary)
  • 2x 10*130mm iFlight Lipo Strap

FC // Raze Whoop AIO F4 (Link)


Mounting pattern:25.5*25.5mm/φ3mm

Weight: 7.4





BEC  output: 5V 2A

INA pad:nR2


Constant current:20A,25A(Burst)


Current sensor:yes


ESC Telemetry:no

Firmware Target:IFLIGHT_F411_PRO

ESC Firmware:Q-H-15

Additional Suggested Parts

  • DJI HD FPV Goggles (LINK)
  • Radio Controller 
  • Battery 3S 450mAh (LINK)


The DJI Remote Controller is recommended for beginners since you won't need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don't choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter and then bind to your own radio as usual.

  • Our current frsky receivers default version in 2.XX, requires to use the same version of frsky transmitter. 
  • If you have none frsky transmitter,please downgrade the version lower than 2.X.X, for more details.


4S battery is not supported!

All iFlight BNFs are tested before shipment to guarantee highest quality. 

If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at

iFlight takes no responsibility for issues with DJI or Caddx 3rd party gear (Video transmitters, Goggles, Radios, etc) and must be directly reported to or

Write a review

Please login or register to review
$1 IFPV Points IFPV Points