Alpha C85 Analog w/Runcam R1 Micro Camera - BNF

Alpha C85 Analog w/Runcam R1 Micro Camera - BNF

Product Code: C009666
Stock Sold Out

Available Options

Product Description

The long requested BNF is finally ready for everyone! Our converted Alpha C85 in a popular CineWhoop pusher configuration for a Insta360 or naked GoPro Hero to shoot the most insane footage ever. Camera and camera case not included but sold separately!

iFlight Naked GoPro Hero 8 Case TPU with BEC Board: LINK


VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.


  • Pusher configuration style frame kit
  • Butter smooth XING1303 5000KV for more torque and efficiency with longer flight times compared to 11xx motors 
  • Camera and batteries are placed on the top of the drone for better CG and better control
  • Universal camera mount for various cams and insane footage
  • Pre-tuned with smooth cinematic settings

Alpha C85 Analog BNF Specs:


- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

Alpha C85 Analog Quad BNF Included Components and Parts

  • Prebuilt and tested Quadcopter
  • 1x Alpha-C 85mm Frame
  • 1x RunCam R1 Micro 1200TVL 1.8mm 14*14
  • 1x 5.8G SucceX Micro Force VTX 300mW
  • 1x Albatross RHCP ipex 5.8g light antenna
  • 2sets HQ 2 inch 4-blades (each 4 props - Color May Vary)
  • 1x iFlight Lipo Strap


June 2021: RunCam Nano2  2.1MM NTSC 4:3 changed to RaceCam R1 Micro 1200TVL 1.8mm 14*14

FC // SucceX-D 20A F4 Whoop AIO


*Mounting pattern:25.5*25.5mm/φ3mm





*BEC output:5V 2A

*INA pad:UART2 (nR2) 


*Constant current:20A,25A(Burst)


*Current sensor:yes


*ESC Telemetry:no


*ESC Firmware:G-H-30 BLS

5.8GHz SucceX Micro 300mW VTX

-Power: PIT/25/100/200mW/300mW

-Antenna interface: IPEX (UFL)

-VTX protocol : IRC Tramp

-Size: 13.5x14.5mm

-Weight: 1.4g

- Mini VTX size: 20x20mm, 2mm hole, total weight (incl. VTX): 3.4g

Additional Suggested Parts

  • Battery 4S 450mAh


  • Our current frsky receivers default version in 2.XX, requires to use the same version of frsky transmitter. 
  • If you have none frsky transmitter,please downgrade the version lower than 2.X.X, for more details.

Write a review

Please login or register to review
$1 IFPV Points IFPV Points