Mach R5 Analog 6S w/ RaceCam R1 Micro Camera

In response to our customer needs, this is our answer for all the racers in out there: The iFlight Mach R5 BNF!
Equipped with XING2 2506 motors for more torque and efficiency as well as high speed and consistent lap times.
Quick-swap arm assembly for easy repair on your flying spot or race day.
Enhanced canopy design with low wind resistance for maximum speed and efficiency.

Two versions available:

• HD version: Caddx Vista Nabula nano
  
• Analog version: SucceX mini Force 600mW with RaceCam R1 Micro

FEATURES:

• Super durable design, 6mm arms and 7075 CNC middle plate
• Super lightweight but superpower with our newest XING2 2506 motors

HIGHLIGHTS:

• XING2 2506 1850KV motors
• BLITZ Mini F7 V1.1
  
• BLITZ Mini E55 4-IN-1 55A ESC
  
• SucceX Mini Force 5.8GHz 600mW VTX Adjustable

Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

PRE-TUNED & PRE-SETUP:

-Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

-To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

-Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

-Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

-GPS Rescue is OFF by default to prevent unwanted or unexpected drone behavior.

-Please check our linked article on "GPS Rescue Mode // Setup"

Changelog:

August 2021: RaceCam R1 Micro 1200TVL 1.8mm 14*14 changed to RaceCam R1 Mini 1200TVL 2.1mm 19*19

April 20, 2022: Before SucceX-D Mini F7 TwinG FC changed to BLITZ Mini F7 V1.1 FC.

May, 2022: Before SucceX Mini 50A ESC changed to BLITZ Mini E55 4-IN-1 55A ESC

FRAME // ：Mach R5

-Wheelbase: 215mm

-Main body dimension: 152*152mm 

-Arm thickness: 6mm

-Bottom plate thickness: 3mm

-Top plate thickness: 2.5mm

-Middle Plate thickness: 2.5mm CNC 7075 aluminum alloy

-TPU Camera plate

-FC: 30.5*30.5/25.5*25.5mm/20*20mm

-FPV Cam: 14mm /19mm Micro / 20mm

FC // BLITZ Mini F7 V1.1

 Product Link

ESC // BLITZ Mini 2-6S E55 4-IN-1 BLHeli32 ESC

Specification:

- Dimension: 35*42mm

- Mounting Holes: 20*20mm/Φ4mm

- Weight: 11.3g

- Supports 2-6S lipo input

- MCU：G071

- Constant: 55 Amps 

- Burst: 60 Amps

- Current sensor: Yes

- BEC: No

- Current rate: 100

- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.

- Firmware: BLHeli 32

- Target:   IFLIGHT_BLITZ_G1

 Product Link

VTX // SucceX Mini Force 5.8GHz 600mW VTX Adjustable

Specification:

• Power: PIT/25/200/400mW/600mW
  
• Antenna interface: MMCX
  
• VTX protocol : IRC Tramp
  
• Output 40 channels
  
• Size: 29*29mm
  
• Mounting pattern: 20*20Φ3/25*25 mmΦ2
• Weight: 4g
  
  

Mach R5 Analog Quad BNF Included Components and Parts

• Prebuilt and tested Quadcopter
• 1x Mach R5 Frame
• 1x RaceCam R1 Mini 1200TVL 2.1mm 19*19
• 1x Sigma RHCP Ipex/UFL 5.8g antenna
• 2sets x Nazgul R5 3-blades (Set of 4 - Color may vary)
• 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)