iFlight-Where dreams can fly

iFlight-Where dreams can fly

ALL Products

Grid View:

FULLSEND X 6S 4500mAh 75C 22.2V Lipo Battery - XT90H


Features:- Cell combination: 6S1P-High 75C discharge rating-Quality grade-A cells-Compact SizeSPECS:- Size: 160*47.6*47mm-Weight: 720.2g- Voltage: 22.2V-Connector: Amass XT90HPackage included:-1x FULLSEND X 6S 4500mAh 75C 22.2V Lipo Battery - XT90HNOTE: BATTERY ONLY, DRONES DO NOT INCLUDE...


BOB57 2506 1500KV 6S FPV Motor


This motor is specially designed for BOB57 Cinematic LR & Freestyle 6inch BNFThe smooth, reliable and powerful motors were upgraded and we achieved an even higher standard in our manufactory as well as better performance than ever before. New center slotted N52H curved arc magnets were introduced to drastically reduce response time of..


FULLSEND 4S 1050mAh 120C 14.8V Lipo Battery - XT60


The Fullsend Lipo batteries offer the best bang for your buck! These batteries have an awesome performance with 120C discharge capability and cost a fraction of most other batteries on the market. High-quality cells ensure even delivery of power with minimal voltage sag under heavy loads.Each Fullsend battery is individually QC checked at the facto..


BLITZ E55 Single 55A ESC


Top Features:- 8 layers double-sided PCB board- 3oz 1.4mm thick power board- 32bit F051 MCU, 48kHz maximum clock speed- TDK MLCC Low ESR ceramic capacitorsSpecification:Supports up to Dshot600, Proshot, Oneshot, Multishot Constant: 55A / Burst: 60A (10S)Up tp 48kHz PWM frequencyTarget: IFLIGHT_BLITZ_G3BlHeli32 telemetry: YesFirmware Versi..


HQ 2x2x3 Tri-blade Prop CW CCW (3sets/6paris)


Propeller Diameter:2inch       Pitch :2             Blades : 3Material : Poly Carbonate        Weight :0.75gHub Diameter : 10mm           Hub Thickness:4.5mm           Shaft 1.9/1.5/1.9mmAdaptor Rings : NOInclu..


ProTek R20 CineWhoop Frame Kit


ProTek R20 Frame Specs:*Weight: 36.4g (without battery)*Bottom plate thickness: 2.5mm*Top plate thickness: 1.5mm*Body Size: 132mm*122mm*FC pattern: 25.5*25.5mm*Arm Thickness: 2.5mm*Propeller size: 2 inch*Wheelbase: 94mmRecommended accessories (not included):- VTX: SucceX Mini Force 5.8GHz 600mW VTX Adjustable (LINK)- Motor: XING-E 11..


ProTek R25 HD/Analog CineWhoop Frame Kit


ProTek R25 BNF Specs:*Weight: 147.5g (without battery)*Bottom plate thickness: 2.5mm*Top plate thickness: 1.5mm*Body Size: 143mm*158mm*FC pattern: 25.5*25.5mm*Propeller size: 2.5 inch*Arm Thickness: 2.5mm*Wheelbase: 113mmRecommended accessories (not included):- VTX: SucceX Mini Force 5.8GHz 600mW VTX Adjustable (LINK) / Cad..


BLITZ E80 4-IN-1 Pro 80A ESC (G2)


The MOSFET used by BLITZ E80 is PSMN1R0-40YLD, which can withstand a continuous current of 80A at 25°C, with a maximum power dissipation of 198W. BEC power supply adopts TI automotive-grade dedicated synchronous rectifier chip, supporting up to 100V.The 1-4 layer power board of the PCB circuit is ultra-thick copper with a thickness of 4OZ..


ProTek R20 Analog 3S ELRS 2.4G - BNF


PRE-TUNED & PRE-SETUP:Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn'..


BOB57 Cinematic LR & Freestyle 6inch w/Nebula Pro Vista HD System - BNF


The pilot & videographer Ellisvanjason and iFlight teamed up to craft a cinematic 6 inch drone that ensures agility and flight time and therefore combines the advantages of both 5 inch and 7 inch drones.Features:- 6 inch drone re-engineered: This drone was specifically designed for 6 inch- H-shaped frame with robust middle section for less prop..

Showing 1 to 12 of 446 (38 Pages)
IFPV Points IFPV Points