ProTek R20 Analog 3S ELRS 2.4G - BNF
Product Description
PRE-TUNED & PRE-SETUP:
Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"
ProTek R20 BNF Specs:
*VTX: SucceX Mini Force 5.8GHz 600mW VTX Adjustable
*Weight: 89.2g (without battery)
*Bottom plate thickness: 2.5mm
*Motor: XING-E 1105 6500KV
*Top plate thickness: 1.5mm
*Body Size: 132mm*122mm
*FC pattern: 25.5*25.5mm
*FPV cam spacing: 14mm
*Whoop F4 AIO 1.1(LINK)
*Arm Thickness: 2.5mm
*Propeller size: 2 inch
*Wheelbase: 94mm
Specifications:
AIO//Whoop AIO F4 V1.1 AIO
Mounting pattern: 25.5*25.5mm/φ3mm
Firmware Target: IFLIGHT_F411_PRO
Constant current: 20A,25A (Burst)
Config:IFLIGHT_F411_PRO.config
Connector: Micro-USB
ESC Firmware: Q-H-15
Current sensor: yes
BEC output: 5V 2A
ESC Telemetry: NO
Size: 30.5*30.5mm
MCU: STM32F411
BLHeli: BLHeli-S
Barometer: NO
Blackbox: 8MB
Gyro: BMI270
INA pad: nR2
Weight: 7.4g
Input: 2-4S
VTX//SucceX Mini Force 5.8GHz 600mW VTX Adjustable
-Power: PIT/25/200/400mW/600mW
-Antenna interface: MMCX
-VTX protocol : IRC Tramp
-Output 40 channels.
-Size: 29*29mm
-Mounting pattern: 20*20Φ3/25*25 mmΦ2
-Weight: 4g
ProTek R20 Analog Quad BNF Included Components and Parts
pre-built and tested Quadcopter
1 x iFlight Lipo Strap 10*150mm (Color May Vary)
2 x HQ 2*2*3 (Set of 4 - Color May Vary)
1 x ProTek R20 AnalogBNF